|
|
1999: 30,000 HP Electric Motor Driven Turbocompressor with Active Magnetic Bearings
1997: Achieving Proper Engine Alignment Through Stress Minimization
2002: Acoustic & Mechanical Dynamics Issues for High Horsepower, High-Speed Compressors in Gas Transmission Service
2005: Acoustical Modeling of Reciprocating Compressors with Stepless Valve Unloaders
1999: Acoustical/Mechanical Design for API-11P Units
2005: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
2006: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
2006: Addressing Hazardous Air Pollutant & Odor Issues for Natural Gas Fired Lean Burn Engines
2004: Advanced Compressor Engine Controls to Enhance Operation, Reliability and Integrity
1997: Advanced Compressor Performance: A Multi-Channel Approach
2004: Advanced Empirical Modeling Software Provides Early Warning of Gas Compression Machinery Failure
2005: Advanced Reciprocating Compression Technology (ARCT)
1999: Advances in Crankshaft Reliability Methods
1998: Air Regulatory Developments: Hot Spots, Industry Response, and Future Compliance Considerations
2005: Air Regulatory Update
1997: Air Toxics Emissions Characteristics and Predictive Formaldehyde Emissions Model Performance for Natural Gas-Fired 2-Stroke, Reciprocating Engines Used in Gas Transmission
2003: Alternative Funding Mechanism for Gas Transmission Infrastructure Upgrades
2005: Alternative Methods of Engine Balance Based on In-Cylinder Determination of Air/Fuel Ratio
2005: Analysis of Exhaust Silencer Stack Using CFD
2000: Analysis of In-Cylinder Heat Transfer in Larger Bore Engines (Research)
2000: Analyzing Engines and Compressors in Economic Terms
2001: The Anatomy of an Electric Bill
2002: API 618 Forced Response Studies – They Can Be Done
2005: API Specifications Review for Gas Turbine Driven Turbocompressors
2003: Application & Field Test of High Pressure Electronic Fuel Gas Injection to a Four-Stroke Slow Speed Natural Gas Pipeline Engine
1998: Application Guidelines: High Speed Gas Transmission Compressors
2000: Application of 500 psi Fuel Management System with Advanced Control Features (Case Study)
2003: The Application of an Online Reciprocating Engine & Compressor Pressure Monitoring System
2005: Application of Elastomeric Materials to Valves in Reciprocating Gas Compressors
1998: Application of Fiber Optic Pressure Sensors to On-Line Engine and Compressor Monitoring
2000: Application of Gas Engine Modeling for Improved In-Cylinder Mixing (Research)
1995: Application of High Energy Multi-Striking Ignition to Large Bore Engines, Including Effects on Combustion Stability and Ignition of Lean Mixtures
2001: Automation & Controls Upgrade Three Clark HBA-8T Engine Compressor Units
2002: Automation & Modernization of Two (2) Cooper Bessemer Z16-330s
1998: Balanced Compressor in a World of Unbalanced Forces and Couples
2005: Balancing Large Bore Gas Engines & Factors Affecting Balance
2000: Balancing Risk and Design Efforts in New Compressor Installations
1999: Basic Compression
2003: Basic Compressor Station Operations & Maintenance: The Top 25 Things Operators & Mechanics Should Do Regularly
2002: Basic Engine & Compressor Analysis Techniques
2003: Basic Engine & Compressor Analysis Techniques
2004: Basic Engine & Compressor Analysis Techniques
2005: Basic Engine & Compressor Analysis Techniques
2003: Basic Operating Characteristics of Centrifugal Equipment
2001: Basic Theory of Gas Turbines & Centrifugal Gas Compressors
2003: Basic Thermodynamics of Reciprocating Compression
2004: Basic Thermodynamics of Reciprocating Compression
2005: Basic Thermodynamics of Reciprocating Compression
2002: Basics of Compression
2000: Benchmarking the Industry – Factors Affecting Compressor Station Maintenance Costs (Case Study)
2002: The Bolted Joint
2004: Calculating Reliable Impact Velocity by Mapping Instantaneous Flow in a Reciprocating Compressor
1999: Carbon Pollutant Emissions and Engine Performance Trade-Offs vs. NOx Emissions for Reciprocating Internal Combustion Engines in Gas Transmission Service
2000: Case Studies Illustrating Improvements in Reciprocating Compressor Design
2004: Case Study of the Performance of Large Horsepower Four Stroke Lean Burn Engine Drives Used in TGP Horsepower Replacement Project
2000: Case Study on the First Commercial High Pressure Fuel Injection Installation (Case Study)
2004: Case Study: The Revamp of Four 7,000 HP Reciprocating Compressors
2002: Centrifugal Pipeline Compressor Technology Evolution: High-Pressure Pipeline Applications
2001: Choosing the Optimum Crankcase Breather System for Stationary Natural Gas Engines
2005: Closed-Loop Control of NOX Emissions in a Two-Stroke Integral Compressor Engine – Part II
1999: Columbia Gas Transmission Corporation Models Operational Excellence by Integrating RCM and Work Management (CMMS)
2000: Common Turbocharger Measurement Locations – A Way to Compare Like Turbochargers (Research)
1999: Comprehensive Computer Model of the Air flow, Combustion Process and Emissions of a Large-Bore, Low-Speed Gas Engine
1999: Compressor Digital (PC) Controls
1996: Compressor Efficiency
2005: Compressor Efficiency Is Worth How Much?
2000: Compressor Flexibility Issues, Efficiency, and Options (Research)
2001: Compressor Foundation Diagnostics & Repair
1998: Compressor Lubrication
1996: Compressor Operating Conditions & Loading: A Torsional Perspective
2005: Compressor Operations Management Expert Tool with Sarbanes Oxley Compliance
2005: Compressor Station Ancillary Equipment: Know What You Are Buying - Part 2
2004: Compressor Station Ancillary Equipment: Know What You Are Buying, Part I
2004: Compressor Station Optimization Using Simulation-Based Optimization
1997: Compressor Valves
2000: Computational Fluid Dynamics of IC Engine Performance and Emissions (Research)
2000: Computer Graphics for Reciprocating Compressor Performance
2005: Computerized Method to Optimally Match Retrofit Turbochargers to Upgraded Engines
2001: Condition Monitoring for Reciprocating Compressors – State of the Art
2005: Considering the Options: Making the Most of Emissions Reduction Requirements
1998: Continuous Combustion and Compressor Pressure Monitoring for Increased Reliability and Efficiency and Reduced Man-Hours
2004: Continuous Pressure Monitoring Based Control Systems for Gas Engines
2004: The Contribution of Base Movement in Large Integral Compressors to Frame Cracks
2005: Controlling Engine Air Balance through Manifold Design
2002: Conversion of Gas Turbine Drivers to Electric Motor Driven Planetary Gear Systems for Centrifugal Compressor Service
2000: Cooper Bessemer GMW Engine Family Pure Turbocharger Upgrades – Motivation, Design, Results (Case Study)
1999: Cost Effective Failure Analysis of Internal Combustion Engines and Related Equipment
2005: Cost Effective NOx Emission Retrofit Control Technologies
1996: Cost-Effective Emissions Reduction of Clark BA-6 Natural Gas Engines
1995: Crankcase Explosion Safety Revisited
2001: Crankcase Rust
2003: The Criticality of High-Speed Separable Alignment
2004: Deploying Next Generation Two-Stroke Cycle Pipeline Engine Controls Today: A Case Study
2002: Design & Prototype a Variable Geometry Turbocharger for 2,000 hp Class of 2- and 4-Stroke Cycle Engines Used in the Natural Gas Transmission Industry
2004: Design Case Study: Foundation for an 8100 HP High-Speed Reciprocating Compressor
1996: Design of Reciprocating Compressor Mounting Systems and Foundations for Integrity & Reliability
2002: Designing Engine Retrofits for Emissions Reductions
2003: Detecting Deterioration of Compression Equipment by Normalizing Measured Performance Relative to Expected Performance
2005: Development & Field Testing of Air-In-Head Starting System
2004: Development & Testing of a Catalytic Converter for the Reduction of CO and H2CO Emissions from a Two-Stroke Lean Burn Gas Engine
2004: Development & Testing of an Expansion Chamber for the Reduction of NOx Emissions in a Two-Stroke Lean Burn Gas Engine
2000: Development and Field Evaluation of Electronic Controls for Two-Cycle Engines (Case Study)
1997: Development and Use of a Parametric Model for Compliance Assurance Monitoring
1995: Development of a New NOx/Oxygen Analyzer for Stationary Sources
2003: Development of a Rod Load Monitor for Continuous Compressor Horsepower Determination & Diagnostic Analysis
2003: Development of a Virtual Pipeline System Testbed Using Non-isothermal Transient Simulation (DOE Research Review)
2000: Development of Air Flow Prediction Algorithm through Large Bore Internal Combustion Engines for the Purpose of Engine-Turbocharger Matching
2003: Development of an Electronic Integrated Throttle Body Governor for Fuel Injected Medium HP Integral Engine-Compressors
2004: Development of an FTIR Continuous Emission Monitor (CEM) for Accurate Engine & Turbine Emission Monitoring
2005: Development of an Open Path Laser Ignition System for a Large Bore Natural Gas Engine
2002: Development, Field Testing and Implementation of An Automatic Variable Volume Unloading System for Reciprocating Compressors
2000: Diagnostic Methods for Condition Monitoring of Reciprocating Compressors
2005: Don’t Retire … ReHire! The Installation of Remanufactured Integral Slow Speed Engines for Horsepower Replacement
2000: Dynamic Crank Web Strain Measurements for Reciprocating Compressors (Research)
1998: Dynamic Design and Related Considerations When Modernizing a Pipeline Compressor Station
2001: Dynamic Valve Actuation Upgrade
2002: The Effect of Air/Fuel Ratio Control Strategies on Nitrogen Compound Formation in NSCR Catalysts
2001: Effect of Different Piston Rod Coatings & Liner Finishes on the Wear Rate of Non-Lubricated Compressor Wear Materials
1997: Effect of Ignition Failures on Combustion Efficiency and Engine Emissions
2001: The Effect of Improved In-Cylinder Mixing on Exhaust Emissions From a Cooper Bessemer GMVH-6
2003: Effect of Pulsation Bottle Design on the Performance of a Modern Low-Speed Gas Transmission Compressor
1996: Effective Automation of Compression Equipment
1999: Effects of Compressor Loading on Pulsation
1999: Effects of Electronic Inductive Ignitions on Engine Performance and Emissions
2001: Electric Compression – “Gaining Power”
2005: Electric Motor Conversion of 2-Stroke & 4-Stroke Integral Engines
2004: Electric Motor Driven Compressors: Basic Principles & Operation
1999: Electrical Classification of Gas Compressor Building
1998: Electrical Classification of Gas Compressor Buildings
1997: Electrical Classifications and Applications of Class I, Division 2, Group D at Compressor Buildings
2005: Emissions Compliance Monitoring Options for Mid-Range Industrial Gas Turbines
1999: Emissions Update
2003: Emissions Update
2001: Energy Audit Results from a Typical Natural Gas Compressor Station
2000: Engine Balance – The Thinking Has Changed (Case Study)
1998: Engine Lubrication
1998: Engine Optimization
2003: Engine Tuning, Not Balance, is the Key to Performance: the “COV” Method
2003: Enhancing Operation of the Existing Natural Gas Compression Infrastructure (DOE Research Review)
2004: Enhancing Operation of the Existing Natural Gas Compression Infrastructure: Phase I
2001: Environmental Regulatory Update
2002: Environmental Regulatory Update
2003: Equivalence Ratio Based on Air-Fuel Ratio Control Strategies
2002: Establishing “Achieved in Practice” Emission Limits for a Simple Cycled Gas Compressor Operating Under Variable Speed
2000: Evaluating Valve Effects on Reciprocating Compressor Efficiency
2002: Evaluation of Compressor Valve Field Test Results Using Uncertainty Analysis
2003: An Evaluation of Enhanced Mixing Technology on Engine Maintenance
1998: Evaluation of Retrofit NOx Reduction Technologies for Clark HBAT Engines
1997: Evolving Technologies and Their Application to Medium and High-Speed Reciprocating Natural Gas-Fueled Engines
1995: Expanded Compressor Capability Through an Alternate Load Control System
2003: Experimental & Numerical Investigation of Two-Stroke Large-Bore Engines Ports Discharge Coefficients
2003: Experimental Evaluation of Fuel Injector Nozzles in a Large Bore Optical Engine
1999: Extending Current Laser Technology to More Precisely Monitor Changes in Engine/Compressor Frame and Cylinder Alignment
2001: Factors Affecting Compressor Valve Reliability
2003: Factors that Affect Surge Pre-Cursors in Centrifugal Compressors (DOE Research Review)
2004: Failure Investigation of Large Mainline Compression Equipment: Conclusions of Several Investigations
2002: Fast NO Measurements In a Two-Stroke Large Bore Natural Gas Engine
2005: Field Application of Micro-Liter Diesel Pilot Ignition to a Worthington SUTC Large Bore Natural Gas Engine
2001: Field Evaluation of All Electric, High Pressure Fueling System
2004: Field Experience with Rod Load Monitor
2003: Field Test & Development of a Low-Cost Mechanically Actuated, Enhanced Mixing System for Emissions Reduction
1996: Field Test of WebMap Program Justifies System Implementation of Program
2000: Formaldehyde Characteristics Utilizing In-Cylinder Sampling in a Large Bore Natural Gas Engine (Research)
1998: Formaldehyde Emissions Prediction for 2-Stroke, Reciprocating Internal Combustion Engines in the Gas Transmission Industry
1998: Formaldehyde Formation Mechanisms in Large-Bore Natural Gas Engines
1997: Foundation Design
1999: Friction and Deflection Characteristics of Epoxy Material for Reciprocating Compressor Foundations
2004: Fuel Consumption Minimization Under Non-Isothermal Condition at Compressor Stations
1999: Fugitive Emission Control in Reciprocating Compressor Rod Packing
2001: Fundamentals of Fatigue Analysis
2004: Fundamentals of Gas Solid/Liquid Separation
2000: Fundamentals of Reciprocating Compressors
2000: Gas Engine Emission Fundamentals
1998: Gas Path Integrity Checks
1999: Gas Path Integrity Checks
2003: Gas Pipeline Compression Equipment Strategies: Case Study of New Equipment Application at an Environmentally Sensitive Installation
2004: Gas Turbine Fuel Considerations
1999: Geotechnical Aspects of Foundation Design
2004: Getting Reliability Through Better Practices on Old Recips
2000: Grouting and Installation of Skid Mounted Equipment
2004: Grouting Large Skid Mounted Compressor Units
2001: Guidelines for Forensic Analysis of Failed Parts
2001: Guidelines for Improving Reliability of Reciprocating Machinery by Avoiding Torsional Vibration Problems
2002: Guidelines for Preventing Torsional Vibration Problems in Reciprocating Machinery
2003: High Power Four Stroke Lean Burn Gas Engines with Centrifugal Compressors in Main Transmission Applications
1995: High Speed Natural Gas Transmission Cylinder
1999: High Speed Reciprocating Compressors: The Importance of Interactive Modeling
1997: Horsepower Evaluation for Gas Pipeline Transmission
2003: How a Centrifugal Compressor Works
2004: How Can I Design an NSCR System That Will Work and How Can I Confirm It?
2002: How to Apply Non-Selective Catalytic Reduction Systems to Rich Burn Engines Successfully
2005: HPFiTM Retrofit Installation Package for Miller Cycle Derivative Large Bore Engines
2004: IEMDC – In-Line Electric Motor Driven Compressor
1997: Ignition System Analysis and Troubleshooting
2001: Ignition System Fundamentals
2001: Impact Measurement as Criteria for Reciprocating Compressors Mechanical Looseness
2002: The Impact of Cylinder Pressure on Fuel Jet Penetration and Mixing/Computational Modeling of Natural Gas Injection in a Large Bore Engine
2003: The Impact of Independent Engine Bank Control for a Large Bore Natural Gas Engine
2001: Impact of Repair Processes of Radial Turbine Nozzle Ring on Turbocharger & Engine Performance
2000: Improved Criteria for Assessing Crankshaft Misalignment (Research)
2004: Improvement to Pipeline Compressor Engine Reliability through Retrofit Micro-Pilot Ignition
2004: Increased Flexibility of Turbo-Compressors in Natural Gas Transmission through Direct Surge Control
1998: Increasing the Value of Gas Turbine Overhaul and Repair
1995: Increasing Turbine Life Through Improved Maintenance Procedures
2001: The Industry's Best Kept Secret: Throughput Optimization
1999: Influence of Reverse Flow Control Systems for Reciprocating Compressors on Pressure Pulsations in the Surrounding Piping
2005: Influence of Sensor Installation on Performance of Combustion Pressure Sensors
2004: The Ins & Outs of Sizing a Reciprocating Compressor
1999: Installation of High Pressure Fuel Injection on a Clark TCV-16
2004: Integrated Design Approach for Reciprocating Compressor Installation
2005: Integrated Design Approach for Reciprocating Compressor Installation
2002: Integrated Station Revitalization – Design Considerations for the Reciprocating Engine Natural Gas Compressor Station
2000: Integrating Diagnostics and Automation Systems to Optimize Reciprocating Assets
2004: The Intelligent Engine: The Core Building Block for the Intelligent Pipeline
1997: Intermediate Engine Analysis
1999: Introduction to Centrifugal Compressors
2000: Introduction to Engine Emission Measurements Using FTIR Spectroscopy (EPA Method 320)
2003: Introduction to Gas Turbine Emissions Control Technology
2001: Introduction to Reciprocating Engine Compression
2004: Introduction to Strategic Sourcing
2000: Introduction to Torsional Vibration Analysis
2005: Introduction to Vibration & Pulsation in Reciprocating Compressors
2000: Investigation into Pulsation Effects on the Measurement of Engine Exhaust Duct Velocities and Related Overestimation Bias in EPA's Stack Flow Reference Methods (Case Study)
1998: Investigation of Inlet Air Humidity Effects on a Large-Bore, Two-Stroke Natural Gas-Fired Engine
1998: Justification of Equipment Analysis
2003: Key Elements Required for Successful CMMS Implementation
1998: Large Horsepower Reciprocating Compressor Station in the Future
2004: Laser Spark Ignition for Natural Gas Fueled Reciprocating Engines
2003: Laser-Spark Ignition for Natural Gas Fueled Reciprocating Engines (DOE Research Review)
2005: Lateral & Torsional Vibration Problems in Systems Equipped with Variable Frequency Drives
2002: A Lively Discussion: How You Can Save Money on Gas Engine Lube Oil
1997: Low Emissions Retrofit Experience Clark HLA-8S
1998: Main Bearing Temperature Monitoring: Evaluation of Strategy Based on Industrial Practice and Experience
2003: Measurement of NSCR Reduction Efficiencies for HAPS, PAH, and BETX Compounds
1997: Measurement Techniques for Reciprocating Compressors for Running Condition Assessment
2002: Measurements & Predictions of Valve Plate Motion and Strain in a High-Speed Compressor
2004: Meeting Regulatory Challenges through Advances in Gas Turbine Emissions Control
1999: Megawatt or BTU? The Selection of Energy Sources for Natural Gas Compression
2002: A Method for Safely Reducing Surge Margins in Centrifugal Compressors
2004: Methodology & Investigation for Determining Start-Up Emissions From Gas Compressor Engines
2003: Micropilot Ignition Studies in a Combustion Test Chamber (DOE Research Review)
2001: Mid-Range Gas Turbines & The MACT
2003: Minimizing Recip Compressor Costs over the Life Cycle of a Project
2005: A Missing Reading, A Surrogate Analysis Tool & A Paradigm for Emission Reductions
2005: Mitigating Turbocharger Reliability Issues on Caterpillar G3600 Series Engines
2004: Mixing & Combustion Investigations in a Large Bore Optical Engine
2001: Mixing Investigations in A Large Bore Natural Gas Engine with Planar Laser Induced Fluorescence/Computational Modeling of the Flow-Field in a Large Bore Natural Gas Engine
2004: Modeling & Parametric Studies of NOx Production in Natural Gas Fired Turbines with Lean Premixed Combustors
1995: Multi-Channel Fiber-Optic Pressure Sensor System for Monitoring & Control of Reciprocating Engines
2004: New Air Regulations Impacting the Natural Gas Industry
1996: New Life from Dead (But Not Buried) Compressors (Case Study)
2000: New Non-Hydraulic High-Pressure Pipeline Engine Fueling System
2002: Next Generation Dry Low NOx for Gas Turbines
1997: Noise Control Fundamentals and Equipment
1999: Noise Measurement & Quieting
2005: Noise Reduction of a Multi-Stage Export/Reinjection Centrifugal Compressor Through the Use of Duct Resonator Arrays
1999: Non-Catalyst Emissions Reduction Package for the Ingersoll-Rand KVG-103
2005: Non-OEM Re-Rate of Centrifugal Compressor: Methods & Results
2005: A Novel Approach to Modeling & Demonstrating Significant NOx Emissions Reductions on Large Bore Stationary Engines Fueled by Multiple Gas Types
1999: NOx Control Technology Options and Development Activity for Mid-Range Natural Gas Fired Turbines
1995: NOx Emissions Reduction for Natural Gas Engines
2004: Numerical & Experimental Investigation of Performance Losses in a Clark Turbocharger Compressor
2003: Numerical Analysis of a Variable Geometry Turbocharger
2003: Oil-Flooded Rotary Screw Compression
2002: On Noise Generation and Abatement in Gas Turbine Installations
2003: On-Engine Demonstration of Micro-Pilot Ignition System for Cooper-Bessemer GMV-4TF (DOE Research Review)
2001: Operation & Maintenance of Divider Block Lubrication Systems
1999: Operations and Maintenance of Gas Compressor Divider Block Lubrication Systems
2000: Operations and Maintenance of Gas Compressor Divider Block Lubrication Systems
2004: Optimized Compressor Efficiency & Performance Through Thermography
2005: Optimizing Peak Efficiency & Flow Range in Pipeline Centrifugal Stages
1999: Optimizing the Application of Medium Speed Reciprocating Compressors in Gas Transmission Service
2004: Overview of Compressor Lubricants & Compressor Lubrication
2003: Performance & Endurance Tests of Six Compressor Valves in Mainline Natural Gas Compression Service
2005: Performance Control of Reciprocating Compressors: Devices for Managing Load & Flow
2002: Performance Evaluation of Oxidation Catalysts for Natural Gas Reciprocating Engines
1996: Performance Evaluation of Sensors for Continuously Monitoring Combustion Pressure in Large Bore IC Engines
1998: Performance Measurements of High Speed/High Ratio Reciprocating Compressors
2003: Performance Measures for Gas Compression
1998: Performance of Ring Materials in Reciprocating Compressors
2004: A Physical Interpretation of the Principles & Application of Rotor Dynamics
2005: A Physical Interpretation of the Principles & Application of Rotor Dynamics
2003: Piston Rod Temperature Management
2000: Practical Applications of Compressor Sizing
1997: Practical Approach to Compressor Valve Failure Analysis
1998: Practical Approach to PEMS Development and Application
2002: Practical Methods for Improved Engine Operations
2003: Pre-combustion Chamber Contribution to Overall Engine Emissions from an Industrial Natural Gas Engine
2005: Predicting Exhaust Gas Temperatures for Lean Burn Two-Stroke Engines
1998: Problems with Modern High Speed Short Stroke Reciprocating Compressors: Increased Pocket Losses Due to Piston Masking and Eccentric Gas Load on the Piston
2000: Project Management – Gas Pipeline Compressor Automation Upgrade (Case Study)
2002: A Proposed Consensus Document for Torsional Vibration Analysis of High Speed Reciprocating Compressor Installations
1999: Pulsation/Vibration Guidelines
2002: Pulsation/Vibration Guidelines
1999: Pushing the Envelope with the Next Generations of Gas Engine and Gas Turbine Lubricants
2001: Rational Vibration, Shaking Force and Separation Margin Guidelines for Acoustical/Mechanical Analysis of Reciprocating Compressor Piping Systems
2005: Recip Pulsation Vibration Troubleshooting: A Practical Approach
2000: Reciprocating Compressor and Station Controls Replacement at Amarillo Station (Case Study)
2003: Reciprocating Compressor Performance Predictions: Control Methodologies from the PLC to the PC
2005: Reciprocating Compressor Sizing & Evaluation
2005: Reciprocating Compressor Valve Plate Life & Performance Analysis
2004: Reduced Operational Costs via Effective On-Site Storm Water Treatment
1997: Relative Performance of High-Pressure Fuel Gas Delivery on Large-Bore, Two-Stroke Natural Gas Engine
2002: Removal of Chromates, Arsenic, and Other Contaminants from Cooling Systems
2000: Resolution of a Compressor Valve Failure: A Case Study
2003: Restoring Crankshaft Alignment: A Case History
2000: Revamp of Six Compressors at Cryogenic Gas Plant (Case Study)
2001: Revitalization of the GMW Engine Family-Complete Station Upgrade/Case Study Development of Emissions Reduction Technology for Worthington UTC Series/HPFi™ Retrofit Installation Package for 4-Cycle Large Bore Slow Speed Engine
2005: Rodloads, Frameloads, Flangeloads, Gasloads, Pinloads: A Discussion of the Various Allowable Loads Used to Rate Reciprocating Compressors
1996: Rotary Screw Compressor
1998: Rotary Screw Theory of Compression
1995: Simplified Offshore Parametric Emissions Monitoring
2001: Site Performance Testing of Gas Turbine Driven Centrifugal Compressors
2005: Solid Rider Bands: Considerations for Installation
1997: Specifying and Reviewing Acoustical/Mechanical Studies
2004: Speed Variation: A Study on Torque Made and Consumed
2002: Stepless Capacity Control for Reciprocating Compressors
1999: Strategically Matching the Turbocharger/Engine for Optimum Performance
1997: Strategies for Cost Effective, Compliant and Competitive Operation of Engine Compressors in the 21st Century: A Macro Perspective
1997: Strategies for Cost Effective, Compliant and Competitive Operation of Engine Compressors in the 21st Century: A Micro Perspective
2005: Surge Protection in Centrifugal Compressor Systems
1995: Systems Approach to Torsional Analysis
1997: Take It to the Limit: The Dynamics of Rod Load and Rod Reversal in Reciprocating Compressors
2002: Taking and Using Data the Right Way
2005: Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure
1998: Theory of Natural Gas Engines
1999: Thermodynamics of Compression
2001: Torsional Amplitude Limits for the Auxiliary End of Ariel Reciprocation Compressors
2004: Torsional Case Studies on High Speed Separable Reciprocating Compressors
2003: Torsional Vibration Modeling & Analysis
2004: Torsional Vibration: The Value of the Field Verification
2003: Totally Enclosed In-Line Electric Motor Driven Gas Compressor (DOE Research Review)
2000: Totally Enclosed In-Line Electric Motor Driven Gas Compressor (Research)
2000: Tracer Gas Measurements of Trapped A/F Ratio and Scavenging Characteristics in a Large Bore Natural Gas Engine (Research)
2004: Transient Gas Flow & Control System Modeling for the Design of Compressor Surge Control Systems for Trips & Upsets
2003: Turbocharger Degradation Measurement Using Embedded Sensor
1999: Turbocharger Optimization or How to Determine If You Have the Right Turbocharger for Your Engine
2002: Turbocharger Performance & Engine Airflow
2003: Turbocharger Performance: Calculations, Corrections & Performance Maps
1998: Turbocharger Predictive Maintenance Strategies
2004: Turbocharger Reliability Issues on Caterpillar G3600 Series Engines
1997: Turbocharger/Engine Matching
2005: Turbocharging a Low BMEP Pump Scavenged Engine
2002: Turbomachinery Test Data and What to Do With It
2000: Types of Vibration Sensors Used on Reciprocating Compressors
2004: Understanding the Pulsation & Vibration Control Concepts in the New API 618 (Fifth Edition)
2000: Update on Air Regulatory Developments Impacting Natural Gas Turbines & IC Engines
2001: An Update on the Successful Application of Parametric Emissions Monitoring to IC Engines
1998: Use of Portable Emissions Analyzer for Engine Diagnostics and Optimization of Retrofit Technologies
1998: User Experience with Actively Controlled Variable Inactivation (Hydrocom) Valve for Unit Loading
2003: Using Data the Right Way
2004: Using Normalized Parameters to Model & Design for the Effects of Scavenging and Trapping on Emissions Performance
2002: Utilizing Thermal Imaging in Your Predictive Maintenance Program
2000: Variable Load and Capacity Control Using Clearance
2000: Variable Speed Planetary Gears – A New Way to Make Electric Motor Driven Compression More Viable
1997: Vertical Forces Cause Vibration in a Reciprocating Compressor
2004: Vibration & Performance Design Considerations for Multi-Unit Reciprocating Compressor Gas Storage Facilities
1998: Vibration Analysis of Reciprocating Compressor Packages
2001: Vibration Profiling for Reciprocating Machinery
2003: Vibration Related Failures of Small-Bore Attachments
1998: Vibrations Caused by Cylinder Gas Passage Acoustical Resonances
2005: Virtual Pipeline System Testbed for Non-Thermal Transient Simulation
2000: Web Deflection Basics & Analysis by Webmap Software
2001: What is CFD, What Do I Need to Know About It & Which System Do I Want to Use?
|
|
